EC1 Stock yang ada versi 2.6 dengan improvement pada circuit serta beberapa improvement fisik (contoh: tombol dan sticker)

Imagine a palm-sized flashlight with a beam distance of over 100m. The EC1 packs a monster beam in a tiny package. Purpose built for camping and the outdoor professionals

The amazing throw is due to the large and deep reflectors combined with state-of-the-art CREE XP-G LEDs. Since the switches are on the head and not on the end, these lights are mega compact compared to other similar battery powered lights.

You can find the unique 2 button interface on all lights in the Explorer Series. Two switches on the head give you fast access to five different brightness, strobe, SOS, and even a red LED close-up uses, like map reading. The red LED also acts as a battery indicator and standby light, so you can locate the device in the dark.

The body is built from tough aerospace grade aluminum and machined with effective grips to ensure a comfortable and secure carry. A titanium plated two-way pocket clip allows you to clip your light any way you want. The lights Explorer series lights are built to withstand punishing outdoor use, so you can count on these lights to perform in the harshest conditions or in emergencies.

The brand new explorer Series from Nitecore has a one-of-a-kind user interface designed for demanding outdoor activities. The EC1 is more compact than any other single CR123A powered flashlight on the market, and still incredibility bright. With 5 modes of output ranging from 280 lumens to 4 lumens, perhaps the most unique feature of Nitecore's new E series is the advanced user interface used to change modes and turn the light on/off. The dual electronic switches make operation a cinch. A clearly labeled 'ON/OFF' button is used to turn the light on and off, and simply press the 'MODE' button to change the brightness levels.

This light also features a red LED power indicator light which displays the battery voltage and remaining power through a series of easy to determine blinks. This indicator light will blink once every 5 seconds when the power of the batteries reaches 50%, and will flicker three times every three seconds when the batteries are near exhaustion, ensuring you have plenty of time to change the batteries and are never left out in the dark. This red LED also doubles as a light source; it emits 0.5 lumens of red light which can be very useful when you only need a minimal amount of light, and the red LED is beneficial when you want to protect your night vision or observe wildlife without disturbing them.

The body of the EC1 and all Explorer series lights is carved from a block of aero-grade aluminum alloy using the most advanced CNC technology available. This not only offers a perfect aesthetic finish but gives Explorer lights incredible durability. Moreover, a stainless steel retaining ring on the flashlight head protects core components from drops and impacts. Explorer series lights are also equipped with the largest reflectors in their class, since they are designed for outdoor use. This large reflector helps send more light out the front end and has longer throw than any other competing product similar in size

The EC1 includes a two-way tactical clip, allowing you to easily attach the light to your backpack, pocket, or belt, and all Explorer series lights are compatible with Nitecore's headband so you can use the light as a headlamp for hands-free illumination. A truly innovative product, the Nitecore EC1 is a must have every-day-carry, and outdoor adventures.

Why you should get the EC1

Features	Benefits
5 brightness levels	For all kinds of situations.
Momentary push-on strobe and SOS modes	For signaling and emergencies.
Dual electronic switches	For ease of use
Secondary red light	For close range stealth use.
Battery power indicator	So you know when your batteries are running out.
Standby indicator light	So you can find your flashlight in the dark.
Broad voltage circuit	So you can both rechargeable or non rechargeable batteries.
Toughened ultra clear mineral glass	Near unbreakable glass to handle rough use.
Precision alloy reflector	Designed for exceptionally long throw so you can see further with just a small light.
Aero grade aluminum alloy body	Gives you a lighter flashlight with greater strength.
HA-III military grade hard-anodized finish	Makes your light highly scratch resistant.
Stainless steel bezel retaining ring	Protects core components from damage.
Detachable two-way anti-rolling clip	So you can use it any where and any way you want.
Waterproof in accordance with IPX-8, up to 2 meters submersible.	Don’t worry about rain or dropping it into a river.
Tail stand function	To light up a small room.

Features and Specifications:

• Output Levels/Runtime:
• Turbo: 280 lumens / 180 seconds (hidden mode)
• High: 200 lumens / 80 minutes
• Medium: 74 lumens / 5 hours
• Low: 25 lumens / 12 hours
• Super Low: 4 lumens / 78 hours
• Battery Type: 1 x CR123A (Not Included)
• Dimensions:
• Bezel Diameter: 1" (25.4mm)
• Body Diameter: 0.86" (22mm)
• Length: 2.56" (65mm)
• Weight: 1.44oz (42.5g)
• Aero-grade aluminum alloy grade construction
• Stainless steel retaining ring protects core components from drops and impacts
• Brand new dual electronic switch design has two easy to use buttons: ON/OFF and MODE
• Two-thirds the size of any other light in its class
• Large reflector for long distance throw
• Power indicator light indicates battery voltage and remaining battery power levels.
• Continuous red light illumination is great for locating your light and for using as a light source to protect night vision.
• Includes two-way tactical pocket clip
• Compatible with Nitecore headband allowing you to use light as a headlamp for hands-free illumination.

Imagine a palm-sized flashlight with a beam distance of over 100m. The EC1 packs a monster beam in a tiny package. Purpose built for camping and the outdoor professionals.

The amazing throw is due to the large and deep reflectors combined with state-of-the-art CREE XP-G LEDs. Since the switches are on the head and not on the end, these lights are mega compact compared to other similar battery powered lights.

You can find the unique 2 button interface on all lights in the Explorer Series. Two switches on the head give you fast access to five different brightness, strobe, SOS, and even a red LED close-up uses, like map reading. The red LED also acts as a battery indicator and standby light, so you can locate the device in the dark.

The body is built from tough aerospace grade aluminum and machined with effective grips to ensure a comfortable and secure carry. A titanium plated two-way pocket clip allows you to clip your light any way you want. The lights Explorer series lights are built to withstand punishing outdoor use, so you can count on these lights to perform in the harshest conditions or in emergencies.

Performance (ANSI FL 1 Standard)

Specifications

LED	CREE XP-G (R5) LED
Reflector	Aluminum
Lens	Toughened ultra-clear mineral glass
Material	T6061 T6 aircraft aluminum alloy
Finish	HA III Military Grade Hard Anodizing
Switch	Dual electronic switch

Dimensions

Length	65mm
Head Diameter	25.4mm
Tail Diameter	22mm
Weight	42.5g (without battery)

Compatible batteries

Primary Lithium (CR123 – 3V)	Yes
Rechargable Lithium (RCR123 – 3.7V)	Yes