Eagletac MX25L4 - AlatSelam.com
  Mohon Tunggu...


Update Terakhir : 28-Feb-2020 09:12:29

Eagletac MX25L4

  • Gambar 1
Harga Retail:
Rp.2,925,000 (Hemat Rp.975,000)

Maaf, barang tidak tersedia online

Hubungi CS kami untuk confirm stock manual

Pembelian dalam jumlah banyak? Hubungi


Top binned CREE XP-G S2 LED

The brightest and most advanced duty flashlight is here!

Maximum lumen output

LED lumen

SST-90 P: 28501-2530/1071/210/19
SBT-90 MB: 18501-1645/700/137/13
SBT-70 PB: 20001-1775/735/148/14

ANSI lumen2

SST-90 P: 22101-1935/820/161/16
SBT-90 MB: 14601-1283/546/107/10
SBT-70 PB: 15851-1402/580/117/11

Turbo boost technology

1) Turbo boost technology is activated every time you turn on at turbo output setting. It offers 20% more power to the LED for the first 200 seconds at turbo mode.

2) ANSI FL-1 lumen is the total overall light output being emitted from the flashlight. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel. EagleTac ANSI FL-1 Lumen output is measured using a calibrated integrated sphere one minute after turning on the flashlight.

Top binned LED

Cool White LED


Luminus is registered trademark of Luminus Devices.

Color tint selection

Cool White LED

This gives you the maximum brightness output in its class and maximum beam distance.

Neutral White LED

If you need awesome beam output out in the woods, or areas with a lot of green vegetation, use our neutral white LED as it offers higher CRI (Color rendering index). Neutral white LED renders color like the sun in the afternoon. Neutral white LED is approximately 7% dimmer than our top binned cool white LED, but it's well worth the ability to see the real color of your surrounding.This gives you better color rendition and more accurate color relative to cool white LED.

SST-90 P-bin LED

Crazy 2120 ANSI lumen, excellent far projecting performance, excellent beam profile, great for close-up use with lowered brightness.

(Cool white LED beam profile shown above) Neutral white LED shares the same beam profile as its cool white version.


Crazy far projecting performance.

Spot and floody beam

Diffused beam

Use the optional diffused filter to instantly transform between spot and floody beam. The floody diffused beam is great for close up work.

MX25L4 - Easy to use

Self intuitive, easy-to-use, nothing to memorize.

Clicky on/off side switch & Twisty head

Easy on/off operation

Turn on the light by press and release the on/off button switch (<0.4s). To turn off the light, press and release the switch again.

Momentary on/off

Press and hold the button switch for immediate output. Release the switch to turn off the light.

Output adjustable

Twist the head to select between four output brightness levels. You can pre-select the desired output level before turning on the flashlight.

Instant 100% output

At any output level, press and hold the flashlight for 100% output. Release the button to return to previous level.

Instant strobe output

At any output level, double press and hold the on/off button switch for strobe output. Release the button to return to previous level. This also work when the flashlight is off.

Access hidden auxiliary modes

With the head at tight position (1st level), loosen to 3rd (or 4th level) and tighten the head within one second to enter AUX. setting. Repeat to cycle through all settings. Turn off the light or loosen the head to quit.

Programmable settings

To switch between tactical mode (default) and regular mode, turn on the flashlight at 1st level, dial to 2nd level and then back to 1st level for ten times within five seconds.

Energy saving technology

This feature reduces output current by 20% after 200 seconds at turbo mode to prolong runtime.