Eagletac MX30L3 (3300lm CREE XH-P50 J4) - AlatSelam.com
  Mohon Tunggu...


Update Terakhir : 25-Apr-2018 15:41:20

Eagletac MX30L3 (3300lm CREE XH-P50 J4)

  • Gambar 1
Harga Retail:
Rp.2,100,000 (Hemat Rp.700,000)
Pembelian dalam jumlah banyak? Hubungi


New Age

MX30(L3) series

A big leap forward from its predecessor MX25(L3). The all-new MX30(L3) series is redesigned from ground up. It features better heatsink, more rigid built, higher output, and better looking. The innovative two buttons switch design allows user to conveniently opreate the light with one-hand only.

Always in perfect alignment

The dual switch position always aligns exact with the gorgeous machined profile of the flashlight body. This also aids user to better predict the switch position in the dark.

Innovative design

Slot load battery design

This patent pending (US/HK/CN) battery compartment design allows users to directly insert batteries to the flashlight body tube to use without any battery tray or magazine.

Spring loaded battery w/ reverse polarity protection

Highly conductive silver coated brass springs are used at both positive and negative terminal to ensure solid conductivity. CNC machined polyoxymethylene discs are used to protect against battery reverse polarity.

Ultra high performance

3300 LED Lumen

Powered by the top binned CREE XH-P50 J4 Cool White LED. The MX30L3 gives you the maximum brightness output in its class. Neutral white output color is also available via custom ordering.

350+ hours runtime

Get maximum continuous runtime with the lowest output of 7lm, which can easily last through months with continuous usage when it's dark. Get 1.5 hours of runtime at the maximum output level. The intermediate 510/103lm level offers 2.5/6/17 hours of runtime.

C3300 Extreme3

Low dropout & highly efficient circuit

To enhance the current regulated runtime with single li-ion battery, we used the latest IC and high-end passive components to minimize the internal resistance and the dropout voltage of the circuitry.

Wide voltage input

M30LC2 allows input voltage from 2.7V all the way to 12V for wide range of battery selection with optional body extension tube for extended runtime.

C5000 HV

Wide voltage input range design

With super wide voltage input from 5.4V all the way to 19V. You can use three rechargeable 18650 li-ion batteries for regular usage. During emergency, you can opt for six primary CR123As which can be easily obtained from EAGTAC dealers or any convenience stores.

Current regulated output

Unlike competitors, the EAGTAC C5000 HV circuit offers constant regulated output for this 6V CREE XH-P50 LED for all brightness levels. Our unique serial battery setup allows the input voltage to be always higher than the LED forward voltage for constant current regulation. We use the latest power step-down technology in the industry with high-end passive components to maximize circuitry efficiency and the dropout voltage of the circuitry.

Deep reflector design

Twisty head & forward clicky switch

Turn on at MAX or MIN output

Press the BLACK button switch to turn on the flashlight at MAX output. Or, press the WHITE button switch to turn on at LOW output. You also get momentary-on and instant strobe function.

Five brightness levels

With flashlight turned on, press the WHITE button switch to switch to the next brighter output level. If you wish to turn on the light at let say 3rd level, just press the WHITE button switch three times rapidly from off. At any level, press and hold the WHITE button switch for more than five seconds to enter the hidden auxilitary blinking modes.