Fenix BC21R Portable Rechargeable Bike Light - With Cree XM-L2 T6 LED - 880 Lumens - Uses 1 x 18650 or 2 x CR123A - AlatSelam.com
  Mohon Tunggu...


Update Terakhir : 23-Jun-2018 15:20:59

Fenix BC21R Portable Rechargeable Bike Light - With Cree XM-L2 T6 LED - 880 Lumens - Uses 1 x 18650 or 2 x CR123A

  • Gambar 1
Harga Retail:
Rp.950,000 (Hemat Rp.514,000)
Pembelian dalam jumlah banyak? Hubungi



Fenix BC21R Portable Rechargeable Bike Light

Light Up Your Path

Biking is an excellent form of exercise and an efficient form of travel, but turns into more of a hazard when the sun goes down and both you and your path aren't quite visible. Don't let the sun setting hinder your ability to ride at night with the Fenix BC21R Rechargeable Bike Light, one of the most powerful and convenient bike lights on the market today! Running on either a rechargeable 18650 battery (included) or a pair of CR123A batteries, this light uses its CREE- XM-L2 T6 LED to produce up to 880 Lumens of eye-pleasing neutral white light, able to reach as far as 125 meters ahead! The BC21R features an Optimized Dual Distance Beam System that uses a uniquely-crafted lens to refract a portion of the upper beam downward, taking light that would normally shine in pedestrians' eyes and using it to brighten what's directly in front of you. The BC21R also has three lower brightness outputs of 380, 200, and 100 Lumens, and even features a Flashing Mode that alternates between 380 and 100 Lumens as a means to signal and much more. All five outputs are accessed using the easy-to-use single Body Switch, powering the light on or off with a half second press and switching between outputs by just clicking the switch.

Convenience and Flexibility

The BC21R is designed for easy operation and adjustment, particularly its mounting system. The specialized bike mount clips securely to the base of the light and sides and clips effortlessly onto the shim, which can be easily adjusted to fit on any handlebars using the flexible strap. Once attached, the light can be rotated forward or backward to your preference and can be removed by simply pressing the back of the mount and pulling. Less than 5 inches in length and weighing under 3 ounces, the light can be easily stored in a backpack or pocket when not in use. Charging is also convenient with the BC21R, capable of being charged internally when installed with its 18650 battery using the included Micro-USB cable rather than removing the battery and needing a separate charger. The light can even measure its remaining charge by pressing the body switch while the light is off, causing the red lights on either side to either glow, flash slowly or flash quickly to indicate remaining charge. Even the body switch itself will flash red constantly when the charge is below 20% capacity, alerting the user to either lower the brightness or charge the light.

Safe and Sturdy Design

To perform as a capable bike light, the BC21R needs to be able to perform well when you are out in the elements, when its illumination may be a vital resource. The bike light's body is constructed from durable aluminum alloy and has earned a water resistance rating of IPX-6, capable of enduring powerful jets of water, more than enough to survive the possible rainstorm while out on a ride. The body's design also gives it improved heat dissipation, which prevents the light from overheating during extended use such as a lengthy bike ride. Internally, the BC21R features both overcharge and over-discharge protection to avoid any chances of damaging both the bike light and the battery from charging or overusing, which could affect the runtime and the overall performance of the light. With its powerful output, convenient flexibility, and durable design, the Fenix BC21R is an absolute must-have for any biker!


  • Body crafted from durable aluminum alloy that can withstand powerful jets of water without damage
  • Optimized Dual Distance Beam System provides suitable amounts of light for space directly in front of you and space further away
  • Features 4 constant brightness outputs as well as a Flashing Mode that switches between High and Low brightness
  • Easy-to-use Body Switch interface used to access and cycle through all outputs with ease
  • Red lights on side act as power status indicators, able to show how much charge is remaining while light is off
  • Body Switch will flash red continuously when the light's charge is below 20% to inform the user to lower the brightness or recharge the light
  • Innovative quick-release bike mount allows for easy and secure attachment, removal, and adjustment of the light
  • Compact size allows light to be easily carried, stored and transported
  • While using an 18650 battery, light is able to be recharged internally using the included Micro-USB cable (WARNING: Do NOT attempt to recharge light internally while CR123As are installed)
  • Built-in Overcharge, Over-Discharge and Overheat Protection to prevent damage to both the light and its batteries
  • Included Accessories:
    • 1 x Fenix 18650 3.6V/2300 mAh Rechargeable Li-Ion Battery
    • 1 x BC21R Bike Mount
    • 1 x USB Charging Cable
    • 1 x Bike Mounting Shim
    • 1 x Bike Mounting Strap
    • 1 x Spare O-Ring


  • LED: 1 x CREE XM-L2 T6 Neutral White LED
  • Power Source: 1 x 18650 Rechargeable Battery (Recommended) OR 2 x CR123A Batteries
  • IPX Rating: IPX-6 (Protected against powerful jets of water)
  • Brightness Outputs (Using 1 x 2300mAh 18650 Battery)(Included):
    • Turbo - 880 Lumens - 1 Hour
    • High - 380 Lumens - 3 Hours
    • Medium - 200 Lumens - 6 Hours
    • Low - 100 Lumens - 12 Hours
    • Flashing Mode - 380 Lumens / 100 Lumens
  • Brightness Outputs (Using 1 x 3400mAh 18650 Battery)(Not Included):
    • Turbo - 880 Lumens - 1 Hour 20 Min.
    • High - 380 Lumens - 4 Hours 30 Min.
    • Medium - 200 Lumens - 8 Hours 30 Min.
    • Low - 100 Lumens - 15 Hours 50 Min.
    • Flashing Mode - 380 Lumens / 100 Lumens
  • Peak Beam Distance: 125 meters
  • Dimensions:
    • Length - 4.45"
    • Width - 1.59"
    • Body Diameter - 1.65"
  • Weight: 2.36 oz.
Lumens: 880 380 200 - 100
Runtime (Hours): 1.33 4.5 8.5 - 15.87
Output Modes: 3+ Brightness Levels, Flashing
Compatible Batteries: 1 x 18650, 2 x CR123A
Batteries Included: Yes
Included Accessories: Batteries, Spare O-ring(s), USB Cable
Flashlight Usage: Bike Lights
Throw Distance (Max): 125m
Switch Location: Body
Product Certifications: IPX-6
Brand: Fenix
Warranty: 30-Day Warranty
Primary Material: Aluminum
Product Weight: 2.36oz
Product Dimensions: 4.45" (L) x 1.59" (W) x 1.65" (Body Diameter)
UPC: 6942870303444
Country of Origin: CN

Operation Instruction

Press and hold the light button for 0.5 seconds to turn ON/OFF the light.

Output Selection
With the light on, click the light button to cycle through Low→Mid→High→Turbo→Flash.


  1. As with any performance light, the bike light builds up heat when runs for an extended period. Intelligent circuitry in the bike light downshifts the light to lower brightness level to guard against overheating.
  2. The bike light retains the last-used brightness level.
  3. When the battery power level is critical, higher brightness levels can not be activated, the bike light is programmed to cycle through lower brightness levels.

Battery Level Indicator
With the light off, single-click the light button, the side light will indicate the battery power level conditions, and then go out after 5 seconds.

  1. Side light constant-on (sufficient power level): 60%-100%
  2. Side light slow flashing (low power level): 20%-60%
  3. Side light quick flashing (critical power level): 1%-20%

Low Power Warning and Intelligent Output Downshift
Low Power Warning: With the light on, when the battery level is lower than 20%, the light button will blink red constantly, to remind you to downshift to a lower brightness level to extend runtime or recharge the bike light.

Intelligent Output Downshift: If non-stop use is needed, the light will downshift to a lower output level to extend runtime. When it downshifts to the flashing mode, the bike light will go out soon. Please stop riding and replace the battery or the bike light.


Operation Points: Remove the anti-dust plug at the bottom of the bike light to reveal the charging port, and plug the Micro USB end of the USB cable into the light’s charging port, then connect the other end of the USB cable to a USB power adaptor.

Charging Indicator: The indicator light in the bike light blinks red to indicate the charging process has begun. The indicator light turns solid green when the battery is fully charged.


  1. Turning on the bike light under charging state is not recommended by Fenix. But it will be okay if under emergency situations, the bike light can light up Low and Mid output.
  2. Once charging is completed, disconnect the USB cable from the light and be sure to secure the anti-dust plug cover.
  3. Fenix recommends using a power adaptor with output over 5V 1.5A. It takes about 4 hours to fully charge the bike light.
  4. The bike light can be connected to the USB cables for digital products such as mobile phones with standard Micro-USB charging port.