Miflex Hoses - Double-Braided Hose - AlatSelam.com
  Mohon Tunggu...

MAU HEMAT? PILIH PAKETAN. HEMAT S/D 60%


Update Terakhir : 24-Mar-2017 17:36:06

Urut Berdasarkan:

Miflex Hoses - Double-Braided Hose

- Selang Made in Italy dengan tingkat resistensi terhadap gesekkan yang sangat tinggi
- Karena selang sangat lentur, selang dapat tetap mengalirkan udara meskipun dalam keadaan ter-tekuk.
- 30% lebih ringan daripada hose biasa.

miflex-xtreme1.jpg

miflex-braided-hose-regulator-blue.jpg

MIFLEX EXTREME
"LOW PRESSURE HOSE"

miflex-standard-hp.jpg

MIFLEX EXTREME
"HIGH PRESSURE HOSE"

miflex-braided-hose-straight-blue-lp-inflator-m.jpg

MIFLEX EXTREME
"INFLATOR HOSE"

 

Extreme Abrasion Resistance

  • MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses
  • Two styles: Regulator low pressure and BC quick-disconnect hoses
  • Patent-pending MIFLEX double braiding design
  • Polyurethane compound liner
  • Polyester inner layer with nylon outer layer braiding
  • Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass
  • MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves
  • Double braiding also resists UV rays out of the water, extending the life span of the hose


Lightweight and Flexible

  • More than 30% lighter in weight when compared to rubber hoses of the same length
  • Kink-resistant design
  • Tie an MIFLEX hose into a tight knot and the flow of air remains continuous through the hose

http://www.h2ogeek.com/divegear/Miflex-XSSQDH.jpg
Manufacturing

  • Made in Italy
  • Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses
  • Automated assembly and testing lines designed and manufactured exclusively for MIFLEX
  • Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests
  • Certified and tested to EN250 Standard
  • Fitting have 5.2 mm internal bore
  • Hose diameter – External 12 mm, Internal 6.5mm

Technical Specifications:

  • Inliner: Polyurethane compound
  • Inner braiding: Polyester thread
  • Outer Layer braid: Nylon thread
  • Fittings and sleeves: UNI EN12164 CW 614 N Chrome plated Brass (AlatSelam.Com)
  • Approvals EN 250 tested and certified
  • Operating Pressure: 35 bar
  • Medium: Air, Air mix, Nitrox and Oxygen
  • Burst pressure: Over 250 bar
  • Traction resistance: Over 150 daN.
  • Hose Diameter Internal: 6.5 mm x external 12 mm
  • Bore on the fittings: Diameter 5.2 mm
  • Marking: MFX – EN 250 – 35 BAR - YEAR



LATEST NEWS :

MARET GILA YANG GILAAAA MULAI 4 MARET 2017....DISKON UP TO 80%