Paket Scuba Cressi Start Pro 2.0 Ultimate 2018 - AlatSelam.com
  Mohon Tunggu...

HEMAT HINGGA 60% PEMBELIAN PAKET VS SINGLE ITEMS



Update Terakhir : 18-Nov-2018 08:44:29

Paket Scuba Cressi Start Pro 2.0 Ultimate 2018

  • Gambar 1
Harga Retail:
Rp.20,373,000
HARGA DISKON:
Rp.12,399,000 (Hemat Rp.7,974,000)
Jumlah:
Pembelian dalam jumlah banyak? Hubungi


DETIL PAKET/PRODUK

Ada beberapa kata yang mendeskripsikan paket ini: KUAT, AWET, BANDEL

Semua komponen di dalam paket ini selain kuat, nyaman, awet, mudah perawatan dan bandel serta tentu saja...murah meriah.
- Semua komponen GARANSI terbuat di Italy dan langsung didatangkan dari Italy.
- Regulator 1st Stage sudah piston dengan Intermidiate Pressure bisa di adjust tanpa harus menggunakan tool tertentu. Meskipun kami tidak menyarankan pelanggan untuk mengatur IP dengan sendiri, fitur ini memudahkan Dive Master (yang sudah sedikit mengerti untuk apa IP itu) untuk melakukan adjustment apabila di kapal mendadak terjadi free flow
NEW Regulator 2nd Stage memiliki model yang sederhana sehingga mudah dalam perawatan. Ukuran yang sangat kecil dari XS Compact

 

1. BCD Cressi Start Pro V 2.0 Diving/Made_in_Italy2.gif

  • Designed primarily as a rental BC for resorts and dive schools, the Start Pro 2.0 gives students and customers the stability of a jacket style BC and the convenience of weight integration. Diver operators will appreciate its bullet-proof construction using 1000 and 500 Denier Cordura and large, easily to see size markings on the shoulder. The Start 2.0 has two unique "gravity" releasable weight pockets equipped with rugged squeeze-style quick-release buckles. The back support is rigid for proper cylinder stability, but is fully padded for comfort and the ridged backpack is equipped with a grab handle for easy transport and gear donning assist. 

    Adjustable sternum strap, waist strap along with both torso adjustment shoulder straps are equipped with squeeze style" quick-release buckles for easy donning and doffing. The BCD has three over-pressure relief/dump valves with two located on the left and right shoulders and a third lower valve on the rear right of the air cell. All three can be manually dumped two with pull cords and the other with the power inflator mechanism. BCD has two techno-polymer D-rings and two additional spring clip holder rings for attachment of instruments and accessories. The Start Pro 2.0 is equipped with the Cressi's streamline Commando Power Inflator with cable activated pull dump valve and 3/8" threaded quick-disconnect hose. Shoulder overpressure relief valve with pull cord is provided for trimming of buoyancy. The inflator mechanism is environmentally sealed for greater reliability and less maintenance. 

    Two large cargo pockets with hook and loop closures are great for storage of gloves or a small dive light and more. The weight pockets have a capacity of 20 lbs. (9 kg.) of hard or soft weighs. The BCD has a lift capacity from 29.2 lbs. to 45 lbs. (13.3 kg to 20.4 kg) depending on the BCD size. The Start Pro weighs from 4.8 lbs. to 6.2 lbs. (2.1 kg to 2.8 kg) dry. BCD comes with an owner's manual.

     

    Cressi Start Pro 2.0 BCD Features

    • Cressi Start Pro 2.0 BCD:
    • Designed Primarily as Rental BC for Resorts and Dive Schools
    • Strong Enough to Rent, Bullet-Proof for Recreational Divers
    • Stability of a Jacket Style BC
    • Convenience of Weight Integration
    • 1000 and 500 Denier Cordura Construction
    • Large, Easy-to-See Size Markings on Shoulder
    • Integrated Gravity Type Weight Pockets: 
      Rugged Squeeze-Style Quick-Release Buckles
      Easy Ditching of Weight in an Emergency
      Weight Capacity: 20lbs (9kg) of Soft or Hard Block Lead Weights
    • 2 Large Accessory Pockets with hook and loop Closures
    • Rigid, Fully Padded Back Support Panel
    • 3 Relief/Overpressure Valves (rear/shoulder valves w/front pull knobs)
    • Cressi Commando Power Inflator w/3/8" Threaded LP Quick-Disconnect Hose
    • Plastic D-Rings for Accessory Attachment
    • Rigid Padded Backpack w/Carry Handle: Stability & Ease of Transport
    • Torso Adjustable Shoulders
    • Adjustable Sternum Strap
    • Adjustable Waist Strap with Cummerbund Pad for Comfort
    • All Straps Equipped with Squeeze-Style" Side-Release Buckles
    • Quick-and-Easy Donning and Doffing
    • Lift Capacities:29.2 lbs. to 45 lbs. (13.25 kg to 20.4 kg) Size Dependent
    • Single Cam Cylinder Band
    • BCD Weight: 4.8 lbs. to 6.2 lbs. (2.1 kg to 2.8 kg), Dry
    • Owner's Manual

    Key Features

    • Jacket style BCD
    • Gravity releasable weight pockets
    • Squeeze-style quick-release buckles
    • Back support is rigid for cylinder stability
    • Fully padded for comfort

    start-lifting-capacity.jpg

bcd-chart.jpg

2. Regulator Cressi MC9 /XS Compact PRODiving/Made_in_Italy2.gif

Regulator is the master of cold water and for travel junkies.

Combines a balanced diaphragm first stage with an SC cold water system with a sealed chamber and a light and compact second stage, that is a high performer in waters colder than 10°C.

This premiere travel regulator packs maximum performance into minimum space. A true featherweight second stage, the XS Compact Pro is built from lightweight techno-polymers to eliminate jaw fatigue. Easy to pack and easy to dive, the XS Compact Pro includes dive/pre-dive Venturi switch for managing freeflow and maximising performance at depth. It's perfect if you're looking for a combination of performance, reliability and low maintenance costs.

Easy to pack and easy to dive, the Compact includes dive/pre-dive Venturi switch for managing freeflow and maximizing performance at depth.

MC9-SEAL CHAMBER 1ST stage
The MC9-SEAL CHAMBER 1ST stage is environmentally sealed, protecting it against icing in cold water and against contamination from particulate matter in silty conditions.
The 1st stage MC9-SC is identical to model MC9, but with a special Seal Chamber which completely isolates the diaphragm and spring from contact with water. This makes it ideal for diving in waters that are rich in suspension and mineral salts, e.g. for archaeological work, cavern, scallop/cray, and diving in cold waters.
Hyper-balanced Diaphragm 1st stage with highly technological content that places it at the top of the Cressi range.
Very light body covered by a protective elastomer shell.
Cylinder sheathed in an anti-friction and anti-corrosion material that guarantees perfect sliding of the piston and long maintenance intervals.
The nozzle, made from 316 stainless steel, can be easily replaced, thus ensuring perfect air-tightness, even after many years of use.
Advanced research on the passage of internal air and a special assistance chamber have enabled the drop of pressure upon inhalation to be kept to a minimum, thus guaranteeing high performance in any situation.
Hyper-balancing allows for an increase of the intermediate pressure at maximum depths and lowering of the pressure in the tank, offering higher performance during the delicate ascent phase and at maximum depths.
DIN 200/300 bar fitting in stainless steel which prevents deformation of the thread in the event that the regulator suffers any falls.

TECHNICAL FEATURES 1ST STAGE
- Balanced diaphragm (seal chamber for MC9SC)
- 2 outlets HP 7/16 UNF
- 4 outlets MP 3/8 UNF
- Service pressure: 300 bar (4350 psi) DIN version, 232 bar (3365 psi) Yoke version
- Calibration pressure: 10 Bar
- Brass body Electroless Nickel plated
- High capacity conical filter electroless nickel plated
- Aisi 316 removable nozzle
- Hyper-balancing
- Anti-pressure drop pneumatic spring
- Setting spring: stainless steel with micropeening treatment
- Replaceable cylinder with anti-friction and anti-corrosion properties
- Elastomer protector
- Flow rate: 4500 l/min
- Yoke version weight: 650 gr 
- Din version weight: 510 gr

The XS Compact Pro second stage regulator has a new anti-air expansion to avoid direct contact with metal tongs to prevent freezing in icy environments. This has allowed their approval for use in Freezing water.
- Downstream system
- Adjustable venturi effect
- Patented antifriction lever 
- Patented sealing washer
- Big purge button
- Anti-scratch surface
- Bayonet-type cap holder with security lock
- Stainless steel cover
- Removable exhaust tee without tools - Weight without hose: 140 gr

 

COMBINATION PERFORMANCE
- Average Cracking effort 7.5 mbar 
- Average breathing effort 1.2 J/l

JACKETED HOSE
extremely light and flexible weight: 153 gr

CERTIFICATION
EN250/2000 for cold water

Complete combo DIN or Yoke regulator set comprising Cressi MC9-SC balanced diaphram first stage regulator and Cressi XS Compact Pro second stage regulator.

Technical Characteristics of the 2nd stage XS Compact Pro with 1st stage MC9-SC.

  • Average breathing labour: 01.2 J/l.
  • EN250/2000 certification for cold water
  • Weight without hose 140 g

(*) Values measured in compliance with standard UNI EN 250.

The second stage comes complete with a black coloured 76 cm long rubber regulator hose.

TOTAL WEIGHT
XS COMPACT PRO MC9-SC INT hose included: 943 gr

Total expected travel weight

  • Cressi Ellipse Balanced MC9-SC 1st Stage - DIN 833 gm (with hose)
  • Cressi XS Compact Pro 2nd Stage 140 gm (without hose)
  • Light Weight Jacketed Hose 153 gm

3. Octopus Cressi XS CompactDiving/Made_in_Italy2.gif

Octopus XS Compact uses the same casing as the XS Compact  model made from special hi-tech polymers, the only difference being the yellow front cover.
All the parts of XS Compact , most of which are patented, can be found on this regulator.
The performance is extremely high, although the calibration is regulated so that the inhalation effort is slightly greater than on the XS Compact , to prevent any self-regulating possibility when it is used as a spare regulator.
Octopus XS Compact suits all the Cressi first stages perfectly and all the first stages with an intermediate pressure between 9 and 10 bar

 

4. AMSCUD CONSOLE 3Diving/Made_in_Italy2.gif


All AmScuD instruments give a very accurate, clear visibility readings and are made from the best quality materials. 

As such, we stand behind our products to give the utmost user experience.

Learning from our over 18 years in the industry, we have sucesfully established both design and materials that is a balanced of functionality, excellent robustness while maintaining a certain cosmetic estathic.

Did we tell you that our gauges are 100% Made in Italy? And it is backed by a full 1-year warranty.

The AmScuD submersible pressure gauge combined with depth gauge and compass, with an internal Bourdon pressure measuring mechanism, gives you clear information on the gas contents of your cylinder.

Dial range is stated in metric standard (BAR) from zero to 400 Bar while the depth gauge will show a METER unit with 1 meter increments.
Dial face is designed with ultra-clarity in mind by being uncluttered, with large black figures on a luminous background giving a long phosphorescent effect. We also include color-indicator for a better idea of what states you are in.
This makes viewing as easy as possible, even in poor visibility conditions.

  • Our gauge case is made from nickel plated brass
  • The dial window is made of highly shock resistant material (anti-splinter polycarbonate). 400 BAR/5,800 PSI dial gauge for your mission critical applications.
  • Elasto-Polimer housing to ensure reliability while maintaining its function and esthathics.
  • Over-pressure capsule fitted in the back of the module to prevent the screen from exploding in the unlikely event of the internal mechanism failing.
  • Our exclusive Dual-Recoil® system located both in depth and pressure gauge. Unlike other gauges in the market, which gauge will fail in case of internal coil is failing, our gauges are designed to have a backup coil.
  • NITROX compatible with Oxygen Cleaned environment, Viton O-Rings on all parts (swivel + HP port) and Christo-Lube lubricant.
  • 30% longer phosphorecent effect.
  • Color coded indicator with 10-bar increments (pressure) and 1-meter increments (depth)
  • Improved swivel umberella design with chanelled o-ring gutter./16" HP port connection.
  • We designed an angle for the gauge so it is easy to view while maintaining its shape for durability (in case of drop/shock).

Cari Produk di Kategori yang Sama