Paket Scuba Cressi Start Professional 2018 -
  Mohon Tunggu...


Update Terakhir : 19-Mar-2018 11:28:57

Paket Scuba Cressi Start Professional 2018

  • Gambar 1
Harga Retail:
Rp.8,599,000 (Hemat Rp.8,966,000)
Pembelian dalam jumlah banyak? Hubungi


Ada beberapa kata yang mendeskripsikan paket ini: KUAT, AWET, BANDEL

Semua komponen di dalam paket ini selain kuat, nyaman, awet, mudah perawatan dan bandel serta tentu saja...murah meriah.
- Semua komponen GARANSI terbuat di Italy dan langsung didatangkan dari Italy.
- Regulator 1st Stage sudah piston dengan Intermidiate Pressure bisa di adjust tanpa harus menggunakan tool tertentu. Meskipun kami tidak menyarankan pelanggan untuk mengatur IP dengan sendiri, fitur ini memudahkan Dive Master (yang sudah sedikit mengerti untuk apa IP itu) untuk melakukan adjustment apabila di kapal mendadak terjadi free flow
NEW Regulator 2nd Stage memiliki model yang sederhana sehingga mudah dalam perawatan. Ukuran yang sangat kecil dari XS Compact


1. BCD Cressi StartDiving/Made_in_Italy2.gif

A new jacket in extremely strong 500 and 1000 denier Cordura AS-COM, with excellent buoyancy, even on smaller sizes. It has been specifically created for diving centres and for renting. 
Start was specifically created to meet the need to offer a very strong and indestructible jacket that would last longer even when subjected to the particularly demanding daily use of diving centres and renting.
Therefore, a combination of materials from the strongest that the market has to offer was chosen. The jacket is made entirely from 500 and 1000 denier Cordura.
The structure is traditional, but the bag is larger, to guarantee good buoyancy even on the smaller sizes, thus countering the typical habit that beginners have of using too much weight.

Technical data

  • Material: 500 and 1000 denier Cordura
  • 2 large accessory pockets with Velcro fastening
  • Rigid, padded back support panel
  • Ventral strap that is separate from the bag
  • Chest harnessing
  • 3 air relief valves
  • 2 accessory rings in engineering plastic
  • 2 snap hook rings
  • Size indicator clearly visible on the shoulder strap


2. Regulator Cressi AC2/XS CompactDiving/Made_in_Italy2.gif

XS2/AC2 is the best valued regulator in the Cressi range. The XS2 2nd stage comes with the traditional Cressi AC2 piston 1st stage. Constantly reviewed over the years, this regulator has lots of admirers in the world due to the fact that it is extremely simple and strong, features that make it easy to use and result in low-cost maintenance.


This regulator is made up of the new 2nd stage XS Compact with elastomer cover combined comes with the traditional Cressi AC2 piston 1st stage. 
Its strengths lie in its extreme lightness, excellent performance, very easy maintenance and affordable purchase price.
Suitable for beginners, diving, schools and rental.

- Self-lubricating jacketed cylinder
- Sintered cup filter
- 4 low pressure outlets
- 1 high pressure outlet

- Downstream system
- Adjustable venturi effect
- Patented antifriction lever
- Big purge button
- Anti-scratch surface
- Bayonet-type cap holder with security lock
- Removable exhaust tee without tools
- Weight without hose :135 gr



- Average cracking effort 9.5 mbar
- Average breathing effort 1.35 J/l
- Jacketed hose extremely light and fl exible weight: 153 gr
Certification: EN250/2000

3. Octopus Cressi XS CompactDiving/Made_in_Italy2.gif

Octopus XS Compact uses the same casing as the XS Compact  model made from special hi-tech polymers, the only difference being the yellow front cover.
All the parts of XS Compact , most of which are patented, can be found on this regulator.
The performance is extremely high, although the calibration is regulated so that the inhalation effort is slightly greater than on the XS Compact , to prevent any self-regulating possibility when it is used as a spare regulator.
Octopus XS Compact suits all the Cressi first stages perfectly and all the first stages with an intermediate pressure between 9 and 10 bar


4. AMSCUD CONSOLE 2Diving/Made_in_Italy2.gif

All AmScuD instruments give a very accurate, clear visibility readings and are made from the best quality materials. 

As such, we stand behind our products to give the utmost user experience.

Learning from our over 18 years in the industry, we have sucesfully established both design and materials that is a balanced of functionality, excellent robustness while maintaining a certain cosmetic estathic.

Did we tell you that our gauges are 100% Made in Italy? And it is backed by a full 1-year warranty.

The AmScuD submersible pressure gauge combined with depth gauge and compass, with an internal Bourdon pressure measuring mechanism, gives you clear information on the gas contents of your cylinder.

Dial range is stated in metric standard (BAR) from zero to 400 Bar while the depth gauge will show a METER unit with 1 meter increments.
Dial face is designed with ultra-clarity in mind by being uncluttered, with large black figures on a luminous background giving a long phosphorescent effect. We also include color-indicator for a better idea of what states you are in.
This makes viewing as easy as possible, even in poor visibility conditions.

  • Our gauge case is made from nickel plated brass
  • The dial window is made of highly shock resistant material (anti-splinter polycarbonate). 400 BAR/5,800 PSI dial gauge for your mission critical applications.
  • Elasto-Polimer housing to ensure reliability while maintaining its function and esthathics.
  • Over-pressure capsule fitted in the back of the module to prevent the screen from exploding in the unlikely event of the internal mechanism failing.
  • Our exclusive Dual-Recoil® system located both in depth and pressure gauge. Unlike other gauges in the market, which gauge will fail in case of internal coil is failing, our gauges are designed to have a backup coil.
  • NITROX compatible with Oxygen Cleaned environment, Viton O-Rings on all parts (swivel + HP port) and Christo-Lube lubricant.
  • 30% longer phosphorecent effect.
  • Color coded indicator with 10-bar increments (pressure) and 1-meter increments (depth)
  • Improved swivel umberella design with chanelled o-ring gutter.
  • 7/16" HP port connection.
  • We designed an angle for the gauge so it is easy to view while maintaining its shape for durability (in case of drop/shock).

Cari Produk di Kategori yang Sama