Paket Scuba Cressi Travelight Value 2018 - SUMMER SUPER SALE 2018! - AlatSelam.com
  Mohon Tunggu...

HEMAT HINGGA 60% PEMBELIAN PAKET VS SINGLE ITEMS



Update Terakhir : 15-Oct-2018 23:53:07

Paket Scuba Cressi Travelight Value 2018 - SUMMER SUPER SALE 2018!

  • Gambar 1
  • Gambar 2
Harga Retail:
Rp.20,851,000
HARGA DISKON:
Rp.11,499,000 (Hemat Rp.9,352,000)
Add On SEASHEL SS2:
Jumlah:
Pembelian dalam jumlah banyak? Hubungi


DETIL PAKET/PRODUK

1. BCD Cressi Travelight Diving/Made_in_Italy2.gif

This jacket has been specifically designed for those who travel by plane as it is the result of painstaking research on the most suitable materials for reducing weight to a minimum. Nothing has been left to chance in the search to achieve a record lightweight BCD, beginning with the material 210 denier nylon which is light yet very strong. All the D-rings are made from a light alloy (Size Medium weighs only 5.5 lbs.). The soft back pack is padded for comfort and incorporates a light rubber area to grip the cylinder with dual cylinder bands for stability. 

The BCD is equipped with two large zippered accessory pockets for storage of your back-up light or small digital camera. Pockets supply more room then on other BCD's which can barely hold your dive gloves. The integrated Lock Aid quick-release weight system hold up to 20 lbs (9 kg), with 10 lbs (4.5 kg) in each pocket, and two additional rear non-releasable trim weight pockets that help increase stability in the water. 

The waistband/cummerbund harness assembly is an independent suspension system that allows the cylinder and the diver to keep proper stability and avoid cylinder shifting on the back, while allowing the BCD's air cell to fully inflate away from the diver not causing restriction or crushing effect as with non-ergonomic designs. Adjustable sternum straps along with both torso adjustment straps are equipped with quick-release buckles. 

BCD has three over-pressure relief/dump valves with two located on the left and right shoulders and a third lower valve on the rear right of the air cell. All three can be manually dumped two with pull cords and the other with the power inflator mechanism. The Travelight can be folded up in just a few seconds and fastened with a special retractable strap so that it can be stowed easily in its carry bag, which comes with a shoulder strap. The Travelight's very light structure and its anatomical shape make it a very tight-fitting, hydrodynamic and streamlined when underwater. 

Buoyancy in: lbs / kg / size 
13 lbs/6.1 kg/XS 
18 lbs/8.2 kg/S 
20.2 lbs/9.2 kg/M 
29.2 lbs/13.3 kg/L 
36 lbs/16.3 kg XL

  • 210 denier nylon material, rubbery material (rear)
  • Integrated Lock Aid weight system
  • Two non-releasable rear trim weight pockets
  • 2 large accessory pockets with zippers
  • Fully padded back support panel
  • Harness strap separate from the air cell
  • Sternum Strap
  • 3 relief and overpressure valves (the rear valves have front pull knobs)
  • Double cylinder bands
  • D-rings and rings in light alloy
  • FAST system for folding/compacting the BC
  • Velcro strap, closed in a lower zip up pocket for packing the BC
Valves: Yes.
Pockets: Four.
Shoulder Straps: Yes. Adjustable.
Stainless Steel Rings: Yes.
Waist Strap: Yes. Adjustable.
Chest buckle: Yes.
Weight [with packaging] Small: 5.85 lb, X-Small: 6.05 lb, Medium: 6.35 lb, Large: 6.5 lb

 

 

2. Regulator Cressi MC9 /XS Compact PRODiving/Made_in_Italy2.gif

Regulator is the master of cold water and for travel junkies.

Combines a balanced diaphragm first stage with an SC cold water system with a sealed chamber and a light and compact second stage, that is a high performer in waters colder than 10°C.

This premiere travel regulator packs maximum performance into minimum space. A true featherweight second stage, the XS Compact Pro is built from lightweight techno-polymers to eliminate jaw fatigue. Easy to pack and easy to dive, the XS Compact Pro includes dive/pre-dive Venturi switch for managing freeflow and maximising performance at depth. It's perfect if you're looking for a combination of performance, reliability and low maintenance costs.

Easy to pack and easy to dive, the Compact includes dive/pre-dive Venturi switch for managing freeflow and maximizing performance at depth.

MC9-SEAL CHAMBER 1ST stage
The MC9-SEAL CHAMBER 1ST stage is environmentally sealed, protecting it against icing in cold water and against contamination from particulate matter in silty conditions.
The 1st stage MC9-SC is identical to model MC9, but with a special Seal Chamber which completely isolates the diaphragm and spring from contact with water. This makes it ideal for diving in waters that are rich in suspension and mineral salts, e.g. for archaeological work, cavern, scallop/cray, and diving in cold waters.
Hyper-balanced Diaphragm 1st stage with highly technological content that places it at the top of the Cressi range.
Very light body covered by a protective elastomer shell.
Cylinder sheathed in an anti-friction and anti-corrosion material that guarantees perfect sliding of the piston and long maintenance intervals.
The nozzle, made from 316 stainless steel, can be easily replaced, thus ensuring perfect air-tightness, even after many years of use.
Advanced research on the passage of internal air and a special assistance chamber have enabled the drop of pressure upon inhalation to be kept to a minimum, thus guaranteeing high performance in any situation.
Hyper-balancing allows for an increase of the intermediate pressure at maximum depths and lowering of the pressure in the tank, offering higher performance during the delicate ascent phase and at maximum depths.
DIN 200/300 bar fitting in stainless steel which prevents deformation of the thread in the event that the regulator suffers any falls.

TECHNICAL FEATURES 1ST STAGE
- Balanced diaphragm (seal chamber for MC9SC)
- 2 outlets HP 7/16 UNF
- 4 outlets MP 3/8 UNF
- Service pressure: 300 bar (4350 psi) DIN version, 232 bar (3365 psi) Yoke version
- Calibration pressure: 10 Bar
- Brass body Electroless Nickel plated
- High capacity conical filter electroless nickel plated
- Aisi 316 removable nozzle
- Hyper-balancing
- Anti-pressure drop pneumatic spring
- Setting spring: stainless steel with micropeening treatment
- Replaceable cylinder with anti-friction and anti-corrosion properties
- Elastomer protector
- Flow rate: 4500 l/min
- Yoke version weight: 650 gr 
- Din version weight: 510 gr

The XS Compact Pro second stage regulator has a new anti-air expansion to avoid direct contact with metal tongs to prevent freezing in icy environments. This has allowed their approval for use in Freezing water.
- Downstream system
- Adjustable venturi effect
- Patented antifriction lever 
- Patented sealing washer
- Big purge button
- Anti-scratch surface
- Bayonet-type cap holder with security lock
- Stainless steel cover
- Removable exhaust tee without tools - Weight without hose: 140 gr

 

COMBINATION PERFORMANCE
- Average Cracking effort 7.5 mbar 
- Average breathing effort 1.2 J/l

JACKETED HOSE
extremely light and flexible weight: 153 gr

CERTIFICATION
EN250/2000 for cold water

Complete combo DIN or Yoke regulator set comprising Cressi MC9-SC balanced diaphram first stage regulator and Cressi XS Compact Pro second stage regulator.

Technical Characteristics of the 2nd stage XS Compact Pro with 1st stage MC9-SC.

  • Average breathing labour: 01.2 J/l.
  • EN250/2000 certification for cold water
  • Weight without hose 140 g

(*) Values measured in compliance with standard UNI EN 250.

The second stage comes complete with a black coloured 76 cm long rubber regulator hose.

TOTAL WEIGHT
XS COMPACT PRO MC9-SC INT hose included: 943 gr

Total expected travel weight

  • Cressi Ellipse Balanced MC9-SC 1st Stage - DIN 833 gm (with hose)
  • Cressi XS Compact Pro 2nd Stage 140 gm (without hose)
  • Light Weight Jacketed Hose 153 gm

3. Octopus AmScuD Dolphin

AmScuD is bringing back its Clasic Dolphin Octopus in the market based on the popular demand. Its proven track record will be a worth investment to any segment of market.

  • Mid-size, high performance octopus that can be combined with any 1st stage in the market.
  • High visibility 39"MIFLEX yellow hose and high visibility yellow cover makes it easy to locate in an emergency
  • Easy purge front cover
  • Proven to be very reliable in dive rental/resort applications.
  • Spare-part mudah didapatkan
  • Plastik anti pecah.
  • Mouthpiece standard (mudah didapatkan dimana saja)
  • Octopus hose 1.2m. Hose sudah MIFLEX (Exclusive for AmScuD)

 

4.AMSCUD CONSOLE 1Diving/Made_in_Italy2.gif

All AmScuD instruments give a very accurate, clear visibility readings and are made from the best quality materials. 

As such, we stand behind our products to give the utmost user experience.

Learning from our over 18 years in the industry, we have sucesfully established both design and materials that is a balanced of functionality, excellent robustness while maintaining a certain cosmetic estathic.

Did we tell you that our gauges are 100% Made in Italy? And it is backed by a full 1-year warranty.

The AmScuD submersible pressure gauge, with an internal Bourdon pressure measuring mechanism, gives you clear information on the gas contents of your cylinder.

The gauge will indicate the cylinder bottle pressure
Dial range is stated in metric standard (BAR) from zero to 400 Bar
Dial face is designed with ultra-clarity in mind by being uncluttered, with large black figures on a luminous background giving a long phosphorescent effect. We also include color-indicator for a better idea of what states you are in.
This makes viewing as easy as possible, even in poor visibility conditions.

  • Our gauge case is made from nickel plated brass
  • The dial window is made of highly shock resistant material (anti-splinter polycarbonate). 400 BAR/5,800 PSI dial gauge for your mission critical applications.
  • Elasto-Polimer housing to ensure reliability while maintaining its function and esthathics.
  • Over-pressure capsule fitted in the back of the module to prevent the screen from exploding in the unlikely event of the internal mechanism failing.
  • Our exclusive Dual-Recoil® system located both in depth and pressure gauge. Unlike other gauges in the market, which gauge will fail in case of internal coil is failing, our gauges are designed to have a backup coil.
  • NITROX compatible with Oxygen Cleaned environment, Viton O-Rings on all parts (swivel + HP port) and Christo-Lube lubricant.
  • 30% longer phosphorecent effect.
  • Color coded indicator with 10-bar increments.
  • Improved swivel umberella design with chanelled o-ring gutter.
  • 7/16" HP port connection.
  • We designed an angle for the gauge so it is easy to view while maintaining its shape for durability (in case of drop/shock).

 


Cari Produk di Kategori yang Sama