Regulator Seac X-10 PRO 7003/21 -
  Mohon Tunggu...


Update Terakhir : 20-May-2018 13:19:40

Regulator Seac X-10 PRO 7003/21

  • Gambar 1
Harga Retail:
Pembelian dalam jumlah banyak? Hubungi


First Stage
The latest high-performance regulators from Seac have a balanced-diaphragm design connected to a second stage with a rubber cover via a lightweight flexible Hiflex braided hose. It looks very much like a Miflex hose.
The Ice version has a dry-sealing cap that stops water coming into direct contact with the pressure-sensing membrane, transferring the pressure via a dry chamber.
It is more suitable for use in water polluted with grit or exceptionally cold water, as you might encounter at a freshwater site in winter. The basic X10 does not have this environmental sealing.
The first stage of each unit has a highly polished chrome finish. This could be said to make them look rather glitzy.
There are four medium-pressure ports in pairs canted away from each other to avoid problems with hose crowding, and two high-pressure ports, one on each side.
A feature that will prove useful, especially when doing repeat dives while based at a dive centre with a rinse tank, is what the manufacturer calls “the membrane block system”. This is claimed to guarantee perfect functioning, even if the regulator is accidentally rinsed without its sealing cap in place.
I can imagine this would appeal to many dive centres abroad that may be used to a clientele that’s a little carefree or thoughtless. I’ve seen those signs posted up over rinse tanks with dire warnings of penalties for anyone rinsing a regulator without the cap in place.


First stage materials: forged brass with shiny chrome finish

Second stage materials: technopolymers, elastomers and ultralight alloys

HP outlets: 2

LP outlets: 4 - 2 of which are inclined at 30°


Second Stage
The retaining ring of the front membrane of each second stage is colour-coded. That of the standard regulator is conventional silvery metal, while the Ice version is metallic blue and that of the octopus rig a metallic yellow.
This feature would be especially useful to a diver equipped with Seac regulators and using multiple gases.
The asymmetric lever design of the second stage ensures top performance at extreme depths. The further the front membrane is pushed in, the less effort is needed to crack open the valve.



Cari Produk di Kategori yang Sama